Power Wheels Battery Charged but Not Working – How To Troubleshoot & Fix?

If we consider the best toys for our juvenile boys, Power Wheels will be one of those that every boy must have dreamt about. In the market, we can find several types of Power Wheels.

Some of these have double seats, and some have single seats. Based on the battery, there are also a few types. The most prevalent are 6V, 12V, and 24V.

Today, we are here with the reasons behind the power wheels battery charged but not working. As we can guess, there are a plethora of reasons behind this. The most common reason is the validity of the battery.

If your battery can no longer serve the held charge, your Power Wheels will not step forward. There are also some tricks to find out if the battery is dead.

According to the rest of the article, please find out the problems, symptoms, and solutions by yourself.

Facts to Fix Power Wheels Battery Charged But Not Working

Let’s start with the vital organs of the article and solve your problems by yourself. There are several symptoms that will indicate that the battery is no longer working.

Besides, there might be some other reasons behind not moving the Power Wheels. We shall disclose all problems with fixations step by step.

The Battery Analysis

The first thing you need to analyze is the battery and the methods are pretty straightforward.

Step-1: First, if there is any lighting option, check if you can turn on the lights.

Step-2: Second, if there is any radio option, check if you can play songs or radio.

Step-3: Thirdly, if both of the above-mentioned options are not working, then open the seat, and you will see the battery with the chipboard. Now detach the battery from the clipboard and motor connections by unplugging all the wires.

Eventually, use a voltage meter to check the output of the battery. If it shows the number of the voltage, it means the battery is okay.

If the battery is okay, and still the car is not moving forward, you may check the other means.

Check The Paddle

After determining the battery status, the second thing you must determine is whether the paddle is okay. Now follow the steps to determine the paddle.

Step-1: By using a minus or flat screwdriver detect the paddle from the right side of the foot resting portion. You will see some wires attached to the paddle.

Step-2: Next, you need to unplug all the wires which will detach the paddle completely.

Step-3: Now, attach the direct power meter with the pins of the paddle. And by using that check the paddle by clicking. If the result shows a surge in the total current flow, it means the paddle is fine. If not, follow the rest of the tools.

Check The Gearbox Or Switch

The other most important part to check is the gearbox or switch. If the gearbox is broken, there will be no function. Again you need to follow the steps accordingly.

Step-1: Generally the gear or switch stays in the middle. It means it is neutral. Turn the switch in the forward direction and click the paddle.

Step-2: Secondly, if there is no response from the previous one, turn the switch in the backward direction and click the paddle.

Step-3: Thirdly, if there is still no response, by using a screwdriver, detach the complete gearbox set. Now unplug all the wires and thoroughly check the switch with the current meter.

If the result from that meter is good, your switch is fine.

Check The Wire

Checking wires is the last thing you can do at your home to fix your Power Wheels. The steps are,

Step-1: Firstly, open the seat by unscrewing all the screws.

Step-2: Then detach one plug that contains a set of wires. Do not remove all the wires at the same time, it may confuse you later while installing the wires again.

Step-3: Now wipe, and clean all the internal portions of the wires and plugs. And re-install all the wires into the plugs again.

It often occurs that the first liquid particles become the barriers against the proper electric flow.

Frequently Asked Questions

If you still have questions about why your power wheel’s battery is charged but not working, read the following FAQ section. You’ll find most of the answers to your queries.

How Do I Know if My Power Wheels Battery Is Bad?

There are several steps you need to follow. First, if there is any lighting option, check if you can turn on the lights. Second, if there is any radio option, check if you can play songs on the radio.

Finally, if both of the above-mentioned options are not working, then open the seat, and you will see the battery with the chipboard. Now detach the battery from the clipboard and motor connections by unplugging all the wires and then check the battery using a bolt meter to determine whether the battery is okay or not.

How Do You Revive a Dead Power Wheels Battery?

Generally, the battery does not die before the validity. Yet, if it dies you ask any mechanic to revive it by charging completely.

Do Power Wheels Have Fuses?

Yes, there is a fuse in the Power Wheels, which helps to prevent malfunctioning of the battery and other tools. Typically, the manufacturer uses a thermal fuse to maximize the safety features and avoid severe conditions.

Conclusion

Power Wheels are not that complex machines to detect problems. And all the above-mentioned steps belong to the fixation of the problems related to battery and wiring.

The symptoms are the issues that cause the power wheels battery charged but not working. However, if you are not able to find the problem or solve it adequately, you can ask the manufacturer for assistance.